+7 812 313 96 74

Новости

Новости

Пресс-релизы

New Portable Flat Panel Detector for Corrosion and Erosion Inspections

22. Фев 2022 /

We are pleased to introduce our new DRC 3643 NDT, which rounds off our DRC product range of robust flat panel detectors. Thanks to its portability and large active area of 36 x 43 cm, the detector is particularly well suited for corrosion and erosion inspections on pipes.

PSMN Recommends HD-CR 35 NDT for Research Applications

08. Фев 2022 /

PSMN, Center for Nuclear Standardization and Quality in Indonesia, has been a user of the HD-CR 35 NDT Computed Radiography scanner since 2018 and uses it with X-ray radiation sources in combination with high-sensitivity white imaging plates to support their various research activities.

Covering both Offshore and Onshore Applications with the HD-CR 35 NDT

07. Сен 2021 /

Winner Inspection has been a user of DÜRR NDT’s HD-CR 35 Computed Radiography scanner since 2017 and utilizes it primarily for pipe wall thickness profiling during service and production stop using Iridium-192. The HD-CR 35 system is also used to inspect weldment, flange and valve conditions in oil and gas plants and platforms.

События

DGZfP-Jahrestagung
23 Май 2022
Расположение: Kassel, Germany

DGZfP-Jahrestagung 2022

Japan International Welding Show
13 Июл 2022
Расположение: Tokyo, Japan

Japan Int. Welding Show 2022

MINDTCE
16 Авг 2022
Расположение: Selangor, Malaysia

6th MINDTCE

Technical articles

Investigation of the effect of metallic screens on image quality in gamma computed radiography

Nick D‘Ademo, DÜRR NDT
15. Ноя 2018 /

The role of metallic screens in computed radiography for controlling scattered radiation is very well-known. This paper extends this topic further and quantitatively investigates how image quality in terms of signal-to-noise ratio (SNR) and basic spatial resolution (SRb) is influenced by metallic screens when Iridium-192 is used as the radiation source.

Practical guideline for digital radiographic testing of welds according to ISO 17636-2

Uli Pöhler, DÜRR NDT; Steve Jelfs, DÜRR NDT
06. Сен 2017 /

As standards become increasingly important in radiographic testing, knowing how to properly apply these standards in real-world applications is now more crucial than ever. Learn how to apply the ISO 17636-2 standard using a steel weld plate as an example and shorten your time to a high-quality image.

Fully-Automated Weld Inspection of Aerospace turbines enabled by Digital Radiography

Nick D‘Ademo, DÜRR NDT; Wolfgang Schultz, DÜRR NDT
04. Сен 2017 /

As the digitization of X-ray technology continues to expand in the NDT inspection world, many manual inspection tasks can now be fully automated. The main benefits are a significant increase in productivity and efficiency as well as higher end-product quality.

© DÜRR NDT GmbH & Co. KG - Все права зарегистрированы.